WaveWare Apollo T-2000 Información técnica descargar pdf (Pagina 65)

Certification Manual

- 65 -

two or more control panels are being installed, the zone

numbers (which are always formatted 1, 2, 3, 4, etc.)

should be duplicated. There should be a zone 1 for panel A and

a zone 1 for panel B and so on. The third column is the resident

name and room data that was programmed in STEP 1. Column

4 is where the appropriate control panel is chosen. Select the

proper type of call in column 5. Columns 8, 9, 10 are where the

zone handler is selected. This allows the installer to select the

pagers which are responsible for the zone. After each line is

completed hit SAVE. When finished click DONE.

Programming Step 5 – Final Parameters.

- Check the settings for Call Escalation Times (Tools / Server / Call

Escalation) Some facilities want different zone types to escalate

at different times.

- Check settings for Server Configuration (Tools / Server / Server

Config) Ensure that the shift times match the shift times used

by the facility.

- Pager Cadence (Devices / TAP out Config / Function Bits) This sets

the pagers to have different audible alerts depending on what

type of call is placed.

- Test the system with the calls and the panel that are

designated for the installation. Ensure everything works

properly so as to minimize troubleshooting in the field.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 113 114

Sin comentarios

WaveWare Apollo T-2000 Información técnica Pagina 65