Waveware API-64 Alarm Monitoring Manual de usuario descargar pdf (Pagina 13)

6. Momentarily power down the API-64RM and then power it back up.

7. Press the <ENTER> key within 5 seconds of powering the unit back up.

8. "Dial no:" should appear on the screen of the computer that you are using. Enter the paging terminal

telephone number that you obtained from the paging supplier or system manager <NUMBER> keys.

Remember to include the area code if required. Include any other digits, or pauses required in the dial string

to obtain an outside line if required. Press <ENTER>

9. " Password:" will appear. If the paging company or system uses a password, enter the number that was

supplied to you. If the paging company or system does not use passwords (most do not) leave this field

blank and press the <Enter>key. Type <CTRL> <N> to exit the programming. Connect the API-64RM to

the API-64 using the cable supplied as shown in the connection diagram on page 3-2.

***********For API-64RM leave all other fields blank in the programming menu***************

WARNING: CONNECTING A TELEPHONE LINE TO THE PROGRAMMING/RS232 PORT ON THE

API-64RM WILL CAUSE DAMAGE TO THE UNIT. REFER TO THE CONNECTION DIAGRAM ON

PAGE 3-2 OF THIS MANUAL.

1 2 ... 8 9 10 11 12 13

Sin comentarios

Waveware API-64 Alarm Monitoring Manual de usuario Pagina 13